Steffen Equipment

1999-2004 3/4 ton Dodge Rear

Product may vary from photo

1993-1999 Chevy Surburban 4×4 rear

Product may vary from photo

1973-1987 1/2 ton Chevy 4×4 Rear

Product may vary from photo

1998-2008 3/4 ton Chevy Cube Van Rear

Product may vary from photo

2006-2009 3/4 ton Chevy Rear

Product may vary from photo

2000-2005 Ford Excursion 2 or 4wd Rear

Product may vary from photo

2005-2008 3/4 ton Ford 4×4 Front

Product may vary from photo

Replacement Handle W/Counter for the Turn-N-Count System

Wachs hydrant Turn-N-Count wrench assembly kit

The HV18 Hydraulic Converter is a portable hydraulic system that gets its power from the hydraulic system of a skidsteer loader, backhoe or any hydraulic source that can produce a minimum of 13 gpm (49 lpm) @ 2000-3000 psi (138-206 bar). The Converter then provides controlled and clean power to the tool with oil cooling.
This unit ranges 13-25 GPM

24 Volt Cordless 1000 LB Capacity
Includes second battery and charging station

9000 LBS OF PULLING POWER,
This is the Multi-Mount system includes the carrier and the wiring for the front of the truck

This is the M6000 Winch small but strong
will pull up to 6000 lbs
A great value

4700 LB DC Winch
Will handle loads up to 4700 lbs

1700 LB DC Winch
will handle loads up to 1700 lbs

90 1/4″ long, 18″ high, 15 1/4″ wide
White Steel Construction
Paddle Handles with Locks

This is for the Drivers Side Only, White in Color

Screen Bulkhead for Full Sized Vans
White in color

30 1/4″ high, 18″ long, 12 1/4″ wide with 4 shelves
White in color

Installation Kit for Ford Series Pickup only
Custom fit to install Weatherguard Cab Protector

64 1/4″ long, 16″ high, 12 1/2″ wide
Black Aluminum Construction
Paddle Handles With Locks

36 5/8″ long, 18″ high,18″ wide
Bright Aluminum Construction
Paddle Handle with Locks

64 1/4″ long, 16″ high, 12 1/2″ wide
White Steel Construction
Paddle Handles with Locks

Measures 87 3/4″ long, 14″ high, and 18″ wide
White in color
Steel Construction

A90008
1 1/8″ x 6″ Keen Kut Bit

B30300
1 1/8″ x 6″ 5.5 Clay Spade

A33014
1 1/8″ x 6″ x 14″ 3″ Chisel Bit

A31014
1 1/8″ x 6″ x 14″ Moil Point

B30500
1 1/8″ x 6″ Asphalt Cutter

B30600
1 1/8″ x 6″ Digging Chisels

3/8″ Parker Hyd Coupler Set

1/2″ Parker Hyd Coupler Set

8′   RRNC-8 Non-conductive hose set
with 3/8″ NPT ends.

10′ RRNC-10 Non-conductive hose set
with  3/8″ NPT ends.

Polesaws are a popular tool for trimming
branchs up to 12″. The 75″ overall
length makes the CS28 a very
productive and user friendly tool.
Cuts hard to reach branches from
aerial basket or from the ground.

Stanley CS6620 Hyd Chainsaw 15″ cut.
The CS6620 is a wood cutting chainsaw
that is used by professional tree
trimmers and utility companies
around the world.

Stanley TA 54103 Hyd Tamper w/ valve
in handle. Stanley tampers are
commonly used for soil compaction
around electric utility poles or fence
posts because of their long stroke
which keeps the tamper on top of the
fill material. The TA 54103 has a
control valve on the handle.

Stanley TA54603 Hyd Tamper-no valve.
Stanley tampers are commonly used for
soil compaction around electric utility
poles or fence posts because of
their long stroke which keeps the
tamper on top of the fill material.
The TA 54603 has no valve on tamper.

Stanley ID07810 Hyd Impact Wrench
7/16″ Quick Change Chuck. The ID07
is a high torque impact wrench used
for tightening and loosening nuts and
driving lag bolts.

Because it is an impact drill/wrench,
it is used for drilling in hard treated
wood and utility poles without
torque reaction to the operator.